Línea completa de mangueras, juntas de expansión y conectores para manipulación de materiales, petróleo, alimentos, químicos y minería.
Estos productos están disponibles con configuraciones finales personalizables desde bridas incorporadas a extremos perlados.
Todos los productos están disponibles con un amplio rango de compuestos y medidas con mayor resistencia a condiciones de abrasión, calor y corrosión.
Uni-Chem Composite Hoses
Standard Chemical Service
Uni-CHEM™ PG, PS, SG and SS composite hoses are specifically designed for in-plant liquid transfer operations as well as tank truck delivery and rail car loading. Constructed with multiple plies of polypropylene films and polyester vapour barriers. Rated for full vacuum.
Uni-CHEM™ PG, PS
- P-Polypropylene Coated Steel Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
- S-316L Stainless Steel – Outer Helix
Uni-CHEM™ SG, SS
- S-316L Stainless Steel – Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
- S-316L Stainless Steel – Outer Helix
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)
Special Chemical Service
Uni-FLON™ special chemical service hoses are built to meet the demands of today’s highly aggressive media. Superior chemical resistance is achieved with a PTFE, inner liner, reinforced with multiple plies of polyester and polypropylene films. Rated for full vacuum.
Uni-FLON™ SG
- S-316L Stainless Steel – Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
Uni-FLON™ SS
- S-316L Stainless Steel – Inner Helix
- S-316L Stainless Steel – Outer Helix
Uni-FLON™ PS
- is available upon request
- Maximum length:100 ft. (10” = 50 ft.)
- Operating Temperature: -40ЉF to + 250ЉF (-40ЉC to +121ЉC)
- Uni-Chem Composite Hoses
Bottom Loading Service
Uni-BL, Uni-OIL™ or Uni-ZENE™
Uni-BL™ is ideal for transferring petroleum and aromatic products in production, refinery and distribution facilities. Suitable for all hose loading arms in bottom loading operations. Constructed with multiple plies of aromatic resistant films and fabrics. All hoses can be color coded to API color codes. Rated for full vacuum.
Uni-BL™
- G-High Tensile Galvanized Carbon Steel Inner Wire
- G-High Tensile Galvanized Carbon Steel Outer Helix
TTMA FLANGES ARE STANDARD EACH END
- Maximum length:100 ft. (10” = 50 ft.)
- Operating Temperature:
Uni-OIL™: -40ЉF to +212ЉF (-40ЉC to +80ЉC)
Uni-ZENE™: -40ЉF to +250ЉF (-40ЉC to +121ЉC)
Vapor Recovery Service
Uni-VR™ hose is ideal for use in petroleum and petrochemical vapour recovery systems in ship-to-shore, bottom loading and tank truck applications. This hose is lightweight and flexible. Manufactured to meet specification CFR33-154. Rated for full vacuum.
Uni-VR™
- G-High Tensile Galvanized Carbon Steel Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)
*Available with a polypropylene coated and stainless steel inner helix.
Standard Petroleum Service
Uni-OIL™ GG standard petroleum service hoses are designed for the transfer of a wide range of petroleum products. Uni-OIL™ GG hoses are ideal for transfer of media from storage tanks and process piping to rail cars or tank trucks. Multiple plies of polypropylene films and fabrics are encased in a polyester vapor barrier for superior operation. Rated for full vacuum.
Uni-OIL™ GG
- G-High Tensile Galvanized Carbon Steel Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +80ЉC)
Special Petroleum Service
Uni-ZENE™ special service petroleum hose is designed to handle modern gasoline additives such as MTBE, ethanol and 31% benzene.
Uni-ZENE™ hoses are built with an effective combination of polyamide, polyester and polypropylene film and fabrics to meet the demands of today’s additives. Also recommended for all JP aviation fuels. Rated for full vacuum.
Uni-ZENE™
- G-High Tensile Galvanized Carbon Steel Inner Helix.
- G-High Tensile Galvanized Carbon Steel
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +250ЉF (-40ЉC to +121ЉC) Outer Helix.
Uni-FLON™ HT Composite Hose
NovaFlex Uni-FLON™ HT is designed as an upgraded version of NovaFlex’s standard, except that it has a temperature rating of 147°C. The high temperature version has the same Teflon® tube but the reinforcement elements have been upgraded to polyamides and nylons that have superior strength at elevated temperatures permitting the 250psi working pressure to be maintained. Rated for full vacuum.
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +350ЉF (–40ЉC to +149ЉC
Uni-OIL™ 300HT High Temperature Composite Hose
NovaFlex Uni-OIL™ 300HT is a high temperature version of the standard Uni OIL™ petroleum. This high temperature hose can handle maximum operating temperatures of +300°F (+149°C). The hose design uses a composite of temperature resistant materials and is rated for use with a wide range of petroleum products. Rated for full vacuum.
- Maximum length: 100 ft. (10” 50 ft.)
- Operating Temperature: -40ЉF to +300ЉF (–40ЉC to +149ЉC)
NovaFlex Pump-Flex™ Composite Hose
Specifically Designed for the Pump Rental Industry
This rugged suction and discharge hose provides extreme flexibility, light-weight handling and excellent service life. Excellent for the transfer of water and oily water. Absorbs pump pulsations. Less manpower to install than rubber hose. Easy to package for shipping & storage.
- Standard lengths:10 ft & 20 ft. with CS 150lb. fixed X floating flanges Crimped couplings. Other fitting combinations available. Rated for full vacuum.
- Maximum length: 100 ft. (10” = 65 ft.)
- Operating Temperature –40ЉF to +212ЉF (-40ЉC to +80ЉC)
(Not for use in marine dock, crude oil, bunker oil or heavy viscous product applications. For these applications, contact NovaFlex. Consult NovaFlex chemical resistance chart for chemical compatibility before use.)
Uni-BioFuel™ 100
Biodiesel and Ethanol Service
Uni-BioFuel™ 100, a special alternative fuel hose designed to handle all grades of biodiesel, including 100% B100, neat biodiesel and E85 – 85% ethanol fuel blends. Uni-BioFuel™ hoses are built with a specialized combination of high performance films and fabrics designed to handle today’s fully concentrated alternative fuels. Rated for full vacuum.
Uni-BioFuel™ 100
- G-High Tensile Galvanized Carbon Steel Inner Helix
- G-High Tensile Galvanized Carbon Steel Outer Helix
- Maximum length: 100 ft. (10” = 50 ft.)
- Operating Temperature –40ЉF to +250ЉF (40ЉC to +121°C)
LPG Composite Style Hose
Designed for the Transfer of Liquified Petroleum Gas
Manufactured with 316 Stainless Steel inner and outer wires and polyamide reinforcement. Available with crimped on schedule 80 carbon steel or stainless steel threaded ends. Also available with ANSI flanges. All assemblies are hydrostatically tested and are tested for electrical continuity.
- CSA certified to CAN/CGA-8.1-M86.
- Operating Temperature: -130°F to +176°F (-90°C to +80°C).
- Rated for full vacuum.
Roof Drain Hose
NovaFlex® Roof Drain Hose is manufactured for use in tanks with floating roof drain systems. It works well as a flexible elbow as it easily bends to 90°. Also suitable for oil skimmers, suction lines and water separators. Compatible both inside and out for a wide range of PH solutions and chemicals.
- Diameters: 1” to 4”
- Lengths up to 100 ft.
- Operating Temperature: -40ЉF to +212ЉF (-40ЉC to +100ЉC)
Nova-Glow™** Photo Luminescent Hose
With Minimal Exposure to Light Emits Soft Glow for Many Hours
Nova-Glow™ Patented Technology is a photo luminescent safety option for the complete line of Uni-Chem® composite hoses. The Nova-Glow luminescent marker runs the length of the hose, offering both identification and safety hazard benefits at night or in reduced light & visibility conditions.
Nova-Glow™ equipped hoses, after having absorbed minimal light, store enough energy to emit an easily perceived glow that will last throughout the night, is non-toxic and deigned to perform its function for the reasonable service life of the hose.
Nova-Glow™ Hoses can assist in visual sighting of hoses such as those commonly used in dock transfer operations occurring during night hours. Nova-Glow™ hoses, after having absorbed minimal light, store enough energy to emit an easily perceived glow that will last throughout the night.
Nova-Glow™ strip is non-toxic and available on our complete range of composite hoses as well as select rubber hoses.
Integral Safety Feature – Photo-luminescent Hose for night time hose transfer operations
Lightweight – Nova-Glow™ does not add any significant weight to hose assembly
Long Service Life – Luminesce for minimum three years.*
*Note: Service life luminescent strip will be shortened if subject to abrasion / wear.
**Patent Protected US 8,667,993 B2, Canada 2,762,243 and others.
Bend Restrictor
A better way to move the tangent/flex point away from the end of the coupling system.
Uni-CHEM® bend restrictors provide increased service life on hose connections. Long lasting ozone resistant EPDM rubber blend. Reduced risk of premature hose wear due to kinking and hose fatigue at tangent point.
Uni-CHEM® Composite Hoses With Custom Flotation Systems
Novaflex – PROMTEC
High Temperature Hose
Novaflex 9155
Furnace Door Fiberglass Hose
Designed to withstand extreme heat (1000БЛF) from exterior in open hearth steel mill furnaces.
Carries water to the furnace door.
Construction:
- Tube: Green SBR non-conductive synthetic rubber. Reinforcement: Plies of polyester tire cord.
- Cover: 1-ply of white fiberglass fabric
- Length: 100 ft.
- Temperature Range:
- Up to +180БЛF (+82БЛC) internal
- (+1000БЛF external) (+538БЛC)
Novaflex 9156
Furnace Door Nomex Hose
Designed to withstand extreme heat from exterior in open hearth steel mill furnaces with the added abrasion resistance of nomex.
Construction:
- Tube: Green SBR non-conductive synthetic rubber.
- Reinforcement: Plies of polyester tire cord.
- Cover: 1-ply of yellow nomex fabric.
- Length: 100 ft.
- Temperature Range:
- Up to +180БЛF. (+82БЛC)
- (+600БЛF external) (+316БЛC)
High Temperature Hose4
Chemical Hose
Novaflex 4200
EPDM Chemical Suction
Hose
A medium duty chemical suction and discharge hose designed to meet the general needs of the industry.
Construction:
- Tube: Black high grade EPDM
- Reinforcement: Multiple plies of tire cord with dual helix wire
- Cover: Blue EPDM
- Length: 100 ft.
- Temperature Range: -30БЛF (-35БЛC) to +225БЛF (+107БЛC)
- Consult chemical resistance chart.
- Not for steam service. Can be open end steam cleaned
Novaflex 4201
EPDM Chemical Discharge
Hose
A high quality discharge hose designed to transfer common chemicals found in industrial service.
Construction:
- Tube: Black high grade EPDM
- Reinforcement: Multiple plies of tire cord
- Cover: Blue EPDM
- Length: 100 ft.
- Temperature Range: -30БЛF (-35БЛC) to +225БЛF (+107БЛC)
- Consult chemical resistance chart before use.
- Not for steam service. Can be open end steam cleaned
Novaflex 4203BE
Diesel Exhaust Fluid
(DEF) Transfer Hose
This is a 200psi working pressure rated hose specifically designed to transfer DEF fluids. This suction and discharge hose has an EPDM construction designed to be resistant to the effects of the media transferred. This hose is flexible and excellent for reel applications.
Construction:
- Tube: Specially formulated EPDM
- Reinforcement: Plies of cord and helix wire
- Cover: Blue EPDM
- Length: 50 ft & 100 ft plain ends/boxed
- Temperature Range: -40БЛ (-40БЛC) to +210БЛF (+98БЛC)
- Banding- DEF Hose, 4203BE, 200psi, 210БЛ max temp,
- urea fluid
Novaflex 4600
FEP Chemical Transfer Hose
Recommended for the transfer of products that require a hose tube with the highest level of chemical resistance. The FEP “teflon-type” tube provides that extra margin of safety; with a white chemical resistant back up rubber stock for high adhesions. FEP transfer hose is excellent for tank truck, barge loading, storage tank transfer and in plant applications requiring flexibility and durability.
Construction:
- Tube: FEP
- Reinforcement: Multiple plies of polyester tire cord with
- helix wire
- Cover: Blue EPDM (available in black, gray, yellow,
- green, white with 400ft. order)
- Length: 100 ft
- Couplings: Use only permanently attached couplings
- designed for “teflon-type” tube hoses
- Temperature Range: -40БЛ (-40БЛC) to +300БЛF (+149БЛC)
- dependant on chemical conveyed. Consult chemical resistant chart. Not for steam service. Can be open end steam cleaned.
- Non-stock orders – (other color hose covers: green, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D. Meets or exceeds the requirements of FDA & USDA under 21 CFR 177, 1550, 3-A sanitary standards 20-15.
Novaflex 4700
UHMW Chemical Suction &
Discharge Hose
A lightweight flexible chemical transfer hose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube.
*WARNING!!
Construction:
- Tube: Clear Ultra High Molecular Weight polyethylene.
- Reinforcement: Multiple plies of high tensile textile with dual helix
- Cover: Green abrasion resistant green EPDM
- (Available in blue, yellow black and grey, white – with 400ft order)
- Length: 100 ft.
- Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF (+121БЛC). Consult chemical resistant chart. Not for steam service. Can be open end steam cleaned
- Non-stock orders – (other color hose covers: blue, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D.
*WARNING! Elevated temperatures can change the chemical resistance rating of 4700. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.
Never use Novaflex 4700 above the ratings listed by Novaflex.
Novaflex 4704 Corrugated
UHMWP Chemical Suction & Discharge Hose
A corrugated version of 4700 designed to offer added flexibility.
*WARNING!!
Construction:
- Tube: Clear Ultra High Molecular
- Weight polyethylene.
- Reinforcement: Multiple plies of high tensile textile with dual helix
- Cover: Green abrasion resistant green EPDM
- (Available in blue, yellow black and grey, white – with 400ft order)
- Length:100 ft.
- Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF
- (+121БЛC)Consult chemical resistant chart
- Not for steam service. Can be open end steam cleaned
- Non-stock orders – (other color hose covers: blue, black, purple, yellow, white, gray) are available and require a 400ft minimum order per I.D.
*WARNING! Elevated temperatures can change the chemical resistance rating of 4704. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature,
reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.
Never use Novaflex 4704 above the ratings listed by Novaflex.
Novaflex 4705
UHMW Crush & Kink
Resistant Chemical Hose
Special kink and crush resistant version of 4700 design utilizing a multi-ply construction with dual special monofilament helix rods. Excellent for use in those demanding abusive transfer applications. To utilize the maximum temperature rating of the hose always permanently attach couplings
*WARNING!!
Construction:
- Tube: Ultra high molecular weight polyethylene.
- Reinforcement: Multiple plies of tire cord with dual monofilament helix, static wire.
- Cover: Green EPDM rubber. Length: 100 ft.
- Temperature Range: -40БЛF (-40БЛC) to +212БЛF (+82БЛC)
- May be used at +250БЛF intermittent. Consult chemical resistant chart. Teflon® is a registered trademark of DuPont
*WARNING! Elevated temperatures can change the chemical resistance rating of 4705. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.
Never use Novaflex 4705 above the ratings listed by Novaflex.
Novaflex 4710
UHMW Chemical Suction & Discharge Hose
A lightweight flexible chemical transferhose designed for almost every common industrial chemical used in industry today. Non-staining UHMW tube.
*WARNING!!
Construction:
- Tube: Clear Ultra High Molecular Weight polyethylene.
- Reinforcement: Multiple plies of high tensile textile with dual helix
- Cover: Green abrasion resistant green EPDM
- (Available in blue, yellow black and grey, white – with 400ft order)
- Length: 100 ft.
- Temperature Range: up to -40БЛF (-40БЛC) to +250БЛF
- (+121БЛC)
- Consult chemical resistant chart. Not for steam service.
- Can be open end steam cleaned
*WARNING! Elevated temperatures can change the chemical resistance rating of 4710. Check the chemical resistance charts published by Novaflex to verify that the chemical to be transferred is rated for use with the UHMWP tube at the temperature & concentrations listed. Most chemicals become more aggressive the higher the temperature, reducing the ability of the tube material to withstand them. Compatibility information is available from Novaflex. If no data exists, it is the users responsibility to determine if the hose is compatible with the chemical to be transferred.
Never use Novaflex 4710 above the ratings listed by Novaflex.
Novaflex 4800/4878
Novaflex 4800 Red Smooth Nitrile Cover
Novaflex 4878 Black Smooth Nitrile Cover
Viton Acid Suction Hose
Recommended for transfer of acid, solvents and chemicals either by pressure or gravity flow. Used as chemical transfer hose for loading tank cars, transport trucks and storage tanks.
Construction:
- Tube: Viton. chemical and heat resistant rubber
- Reinforcement: Plies of polyester tire cord with helix wire
- Cover: Smooth black weather and abrasion resistant nitrile rubber
- Length: 100 ft.
- Temperature Range: -30БЛF (-35БЛC) to +250БЛF (+121БЛC)
- Consult chemical resistance chart. Not for steam service, can be open end steam cleaned
Novaflex 4801 / 4879
Viton. Acid Discharge Hose
Novaflex 4801 Red Smooth Nitrile Cover
Novaflex 4879 Black Smooth Nitrile Cover
Used as a discharge hose for highly corrosive chemicals.
Construction:
- Tube: Viton. chemical and heat resistant rubber.
- Reinforcement: Plies of polyester tire cord.
- Cover: Black, weather resistant nitrile rubber.
- Length: 100 ft.
- Temperature Range: -30БЛF (-35БЛC) to +250БЛF (+121БЛC)
- Consult chemical resistance chart. Not for steam service,
- can be open end steam cleaned.
*Viton® is a registered trade mark of DuPont
Chemical Hose4
Hi-Flow Dry-Release Couplings
Advanced Fluid Handling Systems
by Novaflex
Novaflex Hi-Flow Dry-Release™ Couplings ‘HDC’
The Next Generation in Dry-Release Technology
State of the art couplings designed to safely transfer the most aggressive and valuable product with minimum operator intervention
How it works
Turning the hose unit 15° clockwise locks the units together.
The valves are still closed and are not opened until a further rotation of 90° has been performed and then the product flow is guaranteed. To close the valves and to unlock the units, reverse the procedure.
Applications
- Road/Rail tanker loading/ discharge
- ISO retrofit & new build
- IBC containers
- Offshore rig supply
- Pharmaceutical processing
- Vapor Recovery
- Ship to shore/ship/rig transfer
- Ship manifold exchange
- Bulk loading/discharge
- Paints & inks
- Marine refuelling
- Bitumen transfer
- Brewery
- Food feedstock
- Hazardous waste transfer
- Aviation bunkering
- Exchange manifolds
- Blending pits
- Rail locomotive refuelling
- Tank top/bottom loading
- DEF – Diesel exhaust fluid
NOVAFLEX® IS PROUD TO ANNOUNCE
THE NEXT GENERATION HI-FLOW DRY-RELEASE™ COUPLING – ‘HDC’
The NovaFlex Group® recognizes the need for technological advancements in the fluid transfer industry including critical Dry-Release™ coupling systems.
Developed jointly by the two industry leaders in fluid handling systems, NovaFlex and Roman Seliger engineering teams have pushed the performance boundaries of Dry-Release™ couplings. The new NovaFlex Hi-Flow Dry-Release™ Coupling range exceeds the performance of every compatible coupling available today.
Drawing on decades of real world application experience, the NovaFlex ‘HDC’ coupling optimizes every area of function and design to deliver a truly innovative and reliable safety coupling.
Benefits of NovaFlex ‘HDC’ Hi-Flow Dry-Release Coupling Technology
- Offshore and Marine
- Pharmaceutical
- Oil and Gas
- Rail and Tanker
- Chemical
Novaflex ‘HDC’ couplers and adapters are fully compatible with all brands conforming to NATO STANAG 3756 (PHE)
NovaFlex® – through constant improvement and innovation – is committed to providing industry leading fluid transfer solutions that mitigate risk; protect personnel, property and the environment.
NovaFlex® Hi-Flow Dry-Release Couplings ‘HDC’
Performance Advancement
-
High Flow Co-Efficient
-
Lower Pressure Drop
NovaFlex ‘HDC’ by RS offers the lowest pressure drop and highest flow rates in the industry. Developed from the ground up using the best expertise in the industry, this state of the art range brings numerous advancements resulting in ‘Best in Class’ flow performance, ease of use and maintenance.
In addition to minimal maintenance downtime, seal replacement costs have been reduced by up to 50%. These important advancements translate into improved transfer times, energy savings, lower cost per hour operations, including with viscous fluids, safely and reliably.
Quality Assurance
No matter which part or component, each fitting is backed by the highest quality standards. Each product is CE marked and conforms to the requirements of the European Pressure Equipment Directive; backed by ISO quality program and registered with the Technical Standards & Safety Authority TSSA (CRN registered in Canada). From the start of manufacturing to the final shipment to our customers, each product is put through rigorous inspection and testing steps along the way.
Flow Comparison – Novaflex HDC with Water
Flow Rates by Coupling Diameter
Flow Rates by Coupling Diameter with Water
All products by Novaflex® are warranted to be free from all defects in material and workmanship.
It is impossible to test Novaflex® products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end user’s responsibility to test all Novaflex® products under conditions that duplicate the service conditions prior to installation.
Prior to any application of the information within, please read carefully the following information:
This catalogue is a guide for use in selecting the product for the correct application. It contains warnings, reference directions and directions forsafe use. All guidelines should be clearly understood before specifying or using any NovaFlex® product. Failure to follow recommended application information and recommended procedures may result in premature failure, resulting in bodily injury or property damage. Contact NovaFlex® or your local NovaFlex® distributor for assistance.
For all Novaflex® products, always consult the most recent Proper Care and Maintenance Guides and Chemical Resistance
Due to continuous improvements, technical data is subject to change without notice.
Dust Caps & Plugs / Maintenance Tool
Novaflex® SBC Safety Breakaway Couplings
Eliminate Risk of Unwanted Spill in Accidental Pull-Away/Drive-Away
Safety Breakaway Couplings, a passive valve for use in virtually all fixed and flexible fluid transfer systems, offer optimum safety without work loss. The valves in both halves close automatically before the coupling disconnects completely eliminating any possible product loss in the event of an accidental drive-away or pull-away. The unique valve mechanism guarantees a high flow rate and a low pressure drop and can release at any angle of pull.
- High flow rate/low pressure drop
- Valves in both halves close automatically before the main fluid seal releases to the atmosphere
- Ultra compact design encapsulated shear bolts for protection from external damage
- Will release at any angle of pull easily re-set on-site with one person
- Operates independently of shut off safety systems
- Does not require an external power source
- Used on loading arms and hose
