Brazos de Carga Marinos
B0030 | MARINE LOADING ARM
The B0030 marine loading arm is preferred when loading / unloading sea-going tanker ships and its capability has been proven with many years of trouble free operation worldwide.
The B0030 with its self supporting design includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard- and outboard arm. Thus providing that accurate balance is definitely ensured throughout all maneuvring and connecting positions. The self supporting design provides not only high safety standards for easy operation but also lowest possible jetty loads, which minimizes the cost for the jetty itself.
The advantages in comparison with hose loading facilities are ease of handling, higher availability/ flexibility, less man power and minimum maintenance required by maximum operational safety and minimized operational cost (cost of ownership).
The B0030 can be manually or hydraulically operated.
Additional equipment is available.
ACCESSORIES
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manual quick coupler
- Insulation fl ange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
FEATURES
- Sizes from 4″ up to 16″
- Pressure ratings from PN 10 up to PN 40
- Materials: carbon steel, low temperature steel, stainless steel
- Temperature range: from -50 °C up to +200 °C
- Customized solutions on request
- EMCO high performance swivel joints
DESIGN
- Fully balanced with independent counterweights for inboard and outboard arm
- Self supporting system
- Less man power due to low weight
- Swivel joints either welded-in or fl anged
- For transfer of mineral oil, chemicals and liquefied gases (incl. LNG)
- Seals available in Buna-N, Viton, PTFE or other specific materials
B0030
B0300 | MARINE LOADING ARM
The B0300 marine loading arm has been designed for any kind of special application where it is essential to keep the product pipe consistently the same size for either economical or technical reasons, e.g. cryogenic products down to -104°C, piggable systems and PTFE-lining. This design has proven its reliability for many years now.
The B0300 design includes a special support structur
e for the standpost, inboard and outboard arm and thus separating any mechanical loads imposed to the product pipe, except the dead-weight and internal pressure loads. Additionally this also provides the optimum in regard to operational safety aspects, low weight of the arm and lowest wind loads imposed to the jetty structure.
The balancing of the arm is achieved by a rigid link pantograph system with independent counterweights directly linked to the inboard- and outboard arm. Thus providing that accurate balance is definitely ensured throughout all maneuvring and connecting positions.
The advantages over hose loading facilities are ease of handling, higher availability/ flexibility, less man power and minimum maintenance required while providing maximal operational safety and minimized operational cost (cost of ownership).
The B0300 is designed for hydraulic operation and can be fitted with the most sophisticated ancillary equipment.
Additional equipment is available
ACCESSORIES
- Range alarm system
- Drainage connections
- Emergency release system (ERS)
- Hydraulic operation
- Hydraulic or manual quick coupler
- Insulation flange
- Nitrogen purge line
- Drain line
- Vacuum breaker
- Vapour return line
FEATURES
- Sizes from 4“ up to 16“
- Pressure ratings from PN 10 up to PN 40
- Materials: carbon steel, low temperature steel, stainless steel
- Temperature range: from -104°C up to +200°C
- Customized solutions on request
- EMCO high performance swivel joints
- Fully balanced with independent counterweights for inboard and outboard arm
- Special support frame to reduce imposed mechanical loads
- Light weight design
- Swivel joints either welded-in or flanged
- For transfer of mineral oil, chemicals, and liquefied gases
- Seals available in Buna-N, Viton, PTFE or other specific materials
- Piggable product pipe
- Dedicated material for product pipe